PROBAT-FLUSS MIKRO 100

Pressure Die Casting
Continuous Casting
Sand Casting

Hypoeutectic AlSi alloys G-AlSi8Cu3, G-AlSi10Mg, G-AlSi7Mg G-AlSi12 und G-AlZn10Si8
cleaning
ARSAL 2120
ARSAL 2125
PROBAT-FLUSS AL 224

modification
EUTEKTAL T201
PROBAT-FLUSS MONOTAB NS
EUTEKTAL 375

grain refining
MIKROSAL AL T 100
MIKROSAL AL 350

improvement of the feeding behaviour
PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100

near- and hypereutectic AlSi alloys G-AlSi12, G-AlSi18CuNiMg, G-AlSi17CuNiMg
cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125

grain refining of primary silicon
PROBAT-FLUSS VLP 200

improvement of the feeding behaviour
PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100

low Si alloys ; G-AlMg3, G-AlMg3Si, G-AlCu4Ti
cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125

grain refining
MIKROSAL AL T 100
MIKROSAL AL T 200

improvement of the feeding behaviour
PROBAT-FLUSS LUNKERPULVER 200

Gravity Die Casting

PROBAT-FLUSS MIKRO 100
 Agent to prevent shrinkage holes and the formation of homogenously distributed micro pores applicable for all casting alloys in the sand casting, gravity die casting and low-pressure casting


PROBAT-FLUSS MIKRO 100

  • is a metallic master alloy in form of rods
  • does not require long reaction times
  • impedes the shrinkage hole formation in the gravity die and sand casting
  • leads to fine micro pores
  • increases the density index without contribution to impurities
  • dissolves immediately in the melt without any residues

 

Appearance: aluminium rod in form of an eight

Odour: odourless

Reaction temperature: ex approximately 700°C (higher temperature accelerate the reaction)