PROBAT-FLUSS MIKRO 100
Agent to prevent shrinkage holes and the formation of homogenously distributed micro pores applicable for all casting alloys in the sand casting, gravity die casting and low-pressure casting
PROBAT-FLUSS MIKRO 100
- is a metallic master alloy in form of rods
- does not require long reaction times
- impedes the shrinkage hole formation in the gravity die and sand casting
- leads to fine micro pores
- increases the density index without contribution to impurities
- dissolves immediately in the melt without any residues
Appearance: aluminium rod in form of an eight
Odour: odourless
Reaction temperature: ex approximately 700°C (higher temperature accelerate the reaction)
![](https://www.schaefer-metallurgie.com/wp-content/uploads/2014/11/Stangen_8er.jpg)
![](https://www.schaefer-metallurgie.com/wp-content/uploads/2015/04/EMikro100_1.jpg)
![](https://www.schaefer-metallurgie.com/wp-content/uploads/2015/04/EMikro100_2.jpg)