MIKROSAL AL 350

Untereutektische AlSo-Legierungen

Pressure Die Casting
Continuous Casting
Sand Casting

Hypoeutectic AlSi alloys G-AlSi8Cu3, G-AlSi10Mg, G-AlSi7Mg G-AlSi12 and G-AlZn10Si8
near- and hypereutectic AlSi alloys G-AlSi12, G-AlSi18CuNiMg, G-AlSi17CuNiMg

cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125

grain refining of primary silicon
PROBAT-FLUSS VLP 200

improvement of the feeding behaviour

PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100

low Si alloys ; G-AlMg3, G-AlMg3Si, G-AlCu4Ti
cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125

grain refining
MIKROSAL AL T 100
MIKROSAL AL T 200

improvement of the feeding behaviour
PROBAT-FLUSS LUNKERPULVER 200

Gravity Die Casting

MIKROSAL AL 350
Titanium-boron based grain refining agent for the grain refining of α-aluminium for all aluminium alloys and usage
with an impeller device e. g.: AlMg- and AlCu-alloys, all AlSi-alloys and wrought alloys

MIKROSAL AL 350

  • ensures a dense and shrinkage-free casting
  • highly improves the casting quality
  • increases the technological values
  • ensures a clean and irreproachable surface of the casting part
  • permits an essentially better stream of the melt
  • has an additional cleansing effect
  • produces a low-metal dross
  • can be dosed very well if it is used with an impeller system

Appearance: blue-whitish flakes (compacted preparation)
Odour: odourless
Reaction temperature: ex approximately 720°C (higher temperatures accelerate the reaction)