EUTEKTAL 375

Pressure Die Casting
Continuous Casting
Sand Casting

Hypoeutectic AlSi alloys G-AlSi8Cu3, G-AlSi10Mg, G-AlSi7Mg G-AlSi12 and G-AlZn10Si8
near- and hypereutectic AlSi alloys G-AlSi12, G-AlSi18CuNiMg, G-AlSi17CuNiMg

cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125

grain refining of primary silicon
PROBAT-FLUSS VLP 200

improvement of the feeding behaviour

PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100

low Si alloys ; G-AlMg3, G-AlMg3Si, G-AlCu4Ti
cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125

grain refining
MIKROSAL AL T 100
MIKROSAL AL T 200

improvement of the feeding behaviour
PROBAT-FLUSS LUNKERPULVER 200

Gravity Die Casting

EUTEKTAL 375
Modification and cleaning agent for all AlSi-alloys with a Si-content of less than 12% Usage with an impeller device

 

EUTEKTAL 375

  • sodium modification during the impeller treatment
  • cleaning of the melt from oxides
  • formation of a low-metal dross
  • direct effect after the impeller treatment
  • spheroidization of the eutectic solidified silicon by sodium

 

Appearance: blue powder

Odour: odourless

Reaction temperature: from approximately 700°C ( higher temperatures accelerate the reaction)