MIKROSAL AL T 100

Pressure Die Casting
Continuous Casting
Sand Casting

Hypoeutectic AlSi alloys G-AlSi8Cu3, G-AlSi10Mg, G-AlSi7Mg G-AlSi12 and G-AlZn10Si8
near- and hypereutectic AlSi alloys G-AlSi12, G-AlSi18CuNiMg, G-AlSi17CuNiMg

cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125

grain refining of primary silicon
PROBAT-FLUSS VLP 200

improvement of the feeding behaviour

PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100

low Si alloys ; G-AlMg3, G-AlMg3Si, G-AlCu4Ti
cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125

grain refining
MIKROSAL AL T 100
MIKROSAL AL T 200

improvement of the feeding behaviour
PROBAT-FLUSS LUNKERPULVER 200

Gravity Die Casting

MIKROSAL AL T 100
Titanium-boron based grain refining agent for α-aluminium for all aluminium alloys e. g.: AlMg and AlCu alloys, all AlSi and wrought alloys

MIKROSAL AL T 100

  • ensures a completely dense and micro-shrinkage-free casting
  • improves the casting quality essentially
  • increases the technological values
  • ensures a clean and irreproachable surface of the casting part
  • permits an essentially better flow of the melt
  • has an additional cleansing effect

Appearance: white-grey tablets of 200 g
Odour: odourless
Reaction temperature: ex approximately 720°C (higher temperature accelerate the reaction)