PROBAT-FLUSS LUNKERPULVER 200

Pressure Die Casting
Continuous Casting
Sand Casting

Hypoeutectic AlSi alloys G-AlSi8Cu3, G-AlSi10Mg, G-AlSi7Mg G-AlSi12 and G-AlZn10Si8
cleaning
ARSAL 2120
ARSAL 2125
PROBAT-FLUSS AL 224

modification
EUTEKTAL T201
PROBAT-FLUSS MONOTAB NS
EUTEKTAL 375

grain refining
MIKROSAL AL T 100
MIKROSAL AL 350

improvement of the feeding behaviour
PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100

near- and hypereutectic AlSi alloys G-AlSi12, G-AlSi18CuNiMg, G-AlSi17CuNiMg

cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125

grain refining of primary silicon
PROBAT-FLUSS VLP 200

improvement of the feeding behaviour

PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100

low Si alloys ; G-AlMg3, G-AlMg3Si, G-AlCu4Ti
cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125

grain refining
MIKROSAL AL T 100
MIKROSAL AL T 200

improvement of the feeding behaviour
PROBAT-FLUSS LUNKERPULVER 200

Gravity Die Casting

PROBAT-FLUSS Lunkerpulver 200
 Agent for the application on the feeder of the aluminium casting part to increase the feeding effect. Applicable for all casting alloys in the sand casting

 

PROBAT-FLUSS Lunkerpulver 200

  • is an exothermically reacting powder
  • develops much heat keeping the metal liquid over an extended period of time
  • impedes the cooling down of the feeder on the surface
  • impedes the shrinkage hole formation
  • can be easily removed after the reaction
  • is of very low smoke emission

 

Appearance: dark red powder

Odour: odourless

Reaction temperature: ex approximately 600°C (higher temperature accelerate the reaction)