brass alloys
bronze (leaded red brass, nickel silver)
copper (Cu < 90%)
coatings
PROBAT-FLUSS EXTRA CARBON N
is suitable for the covering of copper and copper alloy melts. A reducing atmosphere is obtained and thus, the melt is prevented from oxidizing at simultaneous deoxidizing effect.
PROBAT-FLUSS EXTRA CARBON N
- consists of approximately 90 % carbon
- no humidity
- low content of ash
- uniform grain size (1-5 mm)
- deoxidizing portions
- lower sulphur content than in commercial charcoal (S < 0.15 %)
- has a slightly higher flash point than PROBAT-FLUSS EXTRA CARBON S
Appearance: black-grey, granular
Odour: odourless
Reaction temperature: ex approximately 700°C
